SILLING FAN REPAIR AT HOME
We all have ceiling fans in our house. Because I can't have a minute without a fan. If this fan suddenly stops moving, it becomes very difficult. If a fan is given to the store. But if the coil is on, you must take it to the fan mechanic. To do this, you need to very carefully open the fan. And see if the coil burned out. If the coil is OK, it can be repaired as follows.
How to Connection
If the fan burns out, you need to buy a new fan. Do not find a mechanic to install a fan. Then you need to fan yourself. What to do, let's see.
What's Problem of Fan
What can cause a fan to turn around?Now I will know about that.And see the solution.
- A bad sound from the fan
- The fan is moving slowly
- The fan is not moving
If a bad sound comes from the fan, it must be carefully opened. Bearings must be checked. If there seems to be a problem, then you need to replace. And if the bearings are working, you need to give them some oil.
Now I will talk about the second and third problem. This problem can be caused by two reasons. One of them is that the capacitor is damaged. And number 2 means that any of the three wires in the coil is cut off.
Take the test to find out if this is true, or to find out which one was cut. All you need is 100 watts. How to check is shown in the figure below.
Take the test to find out if this is true, or to find out which one was cut. All you need is 100 watts. How to check is shown in the figure below.
The three methods shown in the figure above are for testing coils. In one of the three methods, the method was turned off in which the light does not shine.
The wire should be carefully added. Because the coil cables are very soft. The coil wire has a kind of color coating. When you add it, the code must be deleted. You can use a blade or matchbox to pick it up.
If you forgot where it was planted. The solution is given below.
The image above is divided into two parts for some reason. Suppose you add it to the first method. But it turns out that the fan rotates in the opposite direction. Then add according to the second method. Now everything will be alright with the fan.
After the fan is fully installed, check the power supply. If the fan is pointing in the wrong direction, you need to open the fan cables and secure them.
In some cases, four wires are added to the fan coil. How to establish a connection in this case? To do this, follow the picture below.
If you still need help, write it down in the comment box below.
